Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   - 9.20. Pump of the amplifier of steering
      9.20.1. Petrol engines
      9.20.2. Diesel engine of 1,7 l
      9.20.3. Diesel engine of 2,0 l
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
d65d3f49


9.20.3. Diesel engine of 2,0 l

Removal
Prevention

Do not separate the pump of the amplifier of steering from an arm. New pumps are delivered together with arms.


PERFORMANCE ORDER
1. Using clips, press giving and returnable hoses about a tank.
2. Take off an auxiliary driving belt.
3. Remove the air conditioning compressor.
4. Install a container under the pump of the amplifier of steering and disconnect the delivery pipeline from the pump.
5. Weaken a collar and disconnect a returnable tube from the pump.
6. Unscrew the bolt fixing a pipe for the probe for measurement of level of engine oil to the pump and move a pipe aside.
7. Unscrew bolts of fastening of an arm of the pump to the engine and take the pump from under the engine.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal. Fill in fresh liquid in hydraulic system of the amplifier of steering and remove air.