Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   - 9.20. Pump of the amplifier of steering
      9.20.1. Petrol engines
      9.20.2. Diesel engine of 1,7 l
      9.20.3. Diesel engine of 2,0 l
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
d65d3f49


9.20. Pump of the amplifier of steering

9.20.1. Petrol engines

Removal

PERFORMANCE ORDER
1. Remove the air filter.
2. Uncover a filling tank of hydraulic system of the amplifier of steering and, using the syringe, pump out liquid from a tank.
3. Take off an auxiliary driving belt.
4. Install a container under the pump of the amplifier of steering, unscrew a bolt and disconnect the delivery pipeline.
5. Weaken a collar and disconnect a returnable tube from the tank basis.
6. Unscrew four bolts and remove the pump of the amplifier of steering together with the liquid tank for hydraulic system.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal. Fill in new liquid in hydraulic system and remove air from system.