Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of steering
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



9.7. Stabilizer of cross stability of a forward suspension bracket

GENERAL INFORMATION

Forward stabilizer of cross stability

Removal

PERFORMANCE ORDER
1. Remove a forward lower frame.
2. Unscrew nuts of fastening of drafts of the stabilizer of cross resistance to a forward rack and remove drafts.
3. Unscrew bolts of fastening of the clips fixing the stabilizer of cross resistance to the lower frame.
4. Remove the stabilizer of cross stability from the lower frame.
5. Note an arrangement and remove rubber plugs from the stabilizer.
6. Check the stabilizer for wear and mechanical damages. Pay special attention to a condition of plugs of installation of the stabilizer.

Installation

Installation is made in the sequence, the return to removal.