Opel Vectra B
since 1995 release
Repair and operation of the car
Vektr's Opel of B
+
1.1. Governing bodies and control devices
+
2. Maintenance
+
3. Engines
+
4. Heating, ventilation
+
5. Fuel system
+
6. Systems of start, ignition
+
7. Transmission
+
8. Brake system
-
9. Running gear
9.1. Introduction
9.2. Technical characteristics
9.3. Rotary fists
9.4. Replacement of forward hug bearings
9.5. Forward lower frame
9.6. The lobby is resistant
9.7. Stabilizer of cross stability of a forward suspension bracket
9.8. Lower lever of a forward suspension bracket
9.9. Replacement of the lower hinge of a forward suspension bracket
9.10. Back nave
9.11. Back rack
9.12. Stabilizer of cross stability of a back suspension bracket
9.13. Top lever of a back suspension bracket
9.14. Lower lever of a back suspension bracket
9.15. Steering wheel
9.16. Steering column
9.17. Intermediate shaft of a steering column
9.18. Replacement of protective covers of steering transfer
9.19. Steering transfer
+
9.20. Pump of the amplifier of steering
9.21. Removal of air from system of steering with the amplifier
9.22. Tip of steering draft
9.23. Steering draft
9.24. Angles of installation of wheels
+
10. Body
+
11. Electric equipment
+
12. Main malfunctions
9.13. Top lever of a back suspension bracket
GENERAL INFORMATION
Levers of a back suspension bracket
Removal
PERFORMANCE ORDER
1.
Lift a back part of the car and record on supports. Remove the corresponding back wheel.
2.
Unscrew an external bolt, the fixing top lever to a back beam.
3.
Unscrew internal bolts of fastening (arrow) and remove the top lever from a back beam.
Installation
PERFORMANCE ORDER
Installation is made in the sequence, the return to removal, but make tightening of bolts of fastening after lowering of the car on wheels.