Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of steering
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



9.8. Lower lever of a forward suspension bracket

GENERAL INFORMATION

Lower lever of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and record on supports. Remove a forward wheel.
2. Unscrew tightening the bolt fixing a pin of the spherical hinge of the lower lever of a forward suspension bracket to a rotary fist.
3. Using the corresponding lever, move the lower lever of a forward suspension bracket down and separate it from a rotary fist. If the pin of the spherical hinge densely sits in a rotary fist, use the screw-driver or a chisel as a wedge and expand a clip of a rotary fist.
4. Unscrew bolts of fastening of the lever to the lower frame and remove the lever.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal, and make tightening of hinged bolts of fastening of the lever to the lower frame after installation of the car on wheels.