Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of steering
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


d65d3f49

9.19. Steering transfer

Removal

PERFORMANCE ORDER
1. Establish forward wheels for the movement directly forward.
2. Remove a forward lower frame.
3. Unscrew a fastening bolt to the lower frame.
4. Note the provision of clips of fastening of steering transfer (shooter), unscrew bolts and remove clips.
5. Remove steering transfer from the lower frame.
6. Remove rubber pillows from steering transfer, noting their arrangement.
10. The lower bolts of fastening of a case of coupling to the block of cylinders.

Installation

PERFORMANCE ORDER
1. Establish rubber pillows on steering transfer.
2. Establish clips of fastening of steering transfer and fix them by bolts.
3. Establish a back support of the power unit and fix by bolts to the lower frame.
4. Establish a forward lower frame.
5. Check and, if necessary, adjust the angles of installation of forward wheels.