Opel Vectra B

since 1995 release

Repair and operation of the car

Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. Running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward hug bearings
   9.5. Forward lower frame
   9.6. The lobby is resistant
   9.7. Stabilizer of cross stability of a forward suspension bracket
   9.8. Lower lever of a forward suspension bracket
   9.9. Replacement of the lower hinge of a forward suspension bracket
   9.10. Back nave
   9.11. Back rack
   9.12. Stabilizer of cross stability of a back suspension bracket
   9.13. Top lever of a back suspension bracket
   9.14. Lower lever of a back suspension bracket
   9.15. Steering wheel
   9.16. Steering column
   9.17. Intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. Pump of the amplifier of steering
   9.21. Removal of air from system of steering with the amplifier
   9.22. Tip of steering draft
   9.23. Steering draft
   9.24. Angles of installation of wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

9.12. Stabilizer of cross stability of a back suspension bracket

GENERAL INFORMATION

Stabilizer of a back suspension bracket

Removal

PERFORMANCE ORDER

1. Lift a back part of the car and record on supports. Remove back wheels.
2. Unscrew bolts of fastening of thirsts of the stabilizer for a back beam.
	3. Unscrew nuts, the fixing clips of the stabilizer of cross resistance to a back beam. Then incline the stabilizer and take it from under the car.
4. Remove clips of fastening of the stabilizer.
5. Unscrew drafts from the stabilizer.
6. Remove rubber pillows from the stabilizer.

Installation

PERFORMANCE ORDER

Installation is made in the sequence, the return to removal. You make tightening of bolts and nuts of fastening of the stabilizer after installation of the car on wheels.