Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   + 3.1. Repair of the SOCH engine installed in the car
   + 3.2. Repair of the DOCH engine installed in the car
   + 3.3. Repair of the diesel engine of 1,7 l installed in the car
   - 3.4. Repair of the diesel engine of 2,0 l installed in the car
      3.4.1. Introduction
      3.4.2. Technical characteristics
      3.4.3. Check of pressure of compression
      3.4.4. Top Dead Point (TDP) of the piston of the first cylinder
      3.4.5. Check and adjustment of the mechanism of gas distribution
      3.4.6. Cover of a head of the block of cylinders
      3.4.7. Pulley of a bent shaft
      3.4.8. Chain cover
      3.4.9. Natyazhiteli of a chain
      3.4.10. Chains and asterisks
      3.4.11. Camshafts and pushers
      3.4.12. Head of the block of cylinders
      3.4.13. Oil pallet
      3.4.14. Oil pump
      3.4.15. Oil heater
      3.4.16. Replacement of sealing rings of a bent shaft
      3.4.17. Flywheel
      3.4.18. Suspension brackets of the power unit
   + 3.5. Capital repairs of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



3.3.17. Flywheel

Removal

PERFORMANCE ORDER
1. Remove the transmission and coupling.
2. Record a flywheel from a provorachivaniye, having established a clamp on a gear wreath of a flywheel.
3. Apply a combination tag on a bent shaft and a flywheel.
4. Unscrew bolts and remove a flywheel.

Check

PERFORMANCE ORDER
Check a flywheel for wear from coupling and a condition of teeths of a gear wreath of a flywheel.

Installation


Prevention

At installation of a flywheel it is necessary to use new bolts.


PERFORMANCE ORDER
1. Clear the interfaced surfaces of a flywheel and a bent shaft.
2. Establish a flywheel according to earlier made tags and screw in new bolts of fastening of a flywheel.
3. Record a flywheel from a provorachivaniye and tighten bolts of fastening of a flywheel in several stages.
4. Establish coupling and the transmission.