Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
- 1.1. Governing bodies and control devices
   1.2. Combination of devices
   1.3. Control bulbs
   1.4. The counter of the passable way and hours
   1.5. Triple - Info - the display
   1.6. Multi - Info - the display
   1.7. Multi - Info - the display - Check-control
   1.8. Multi - Info - the display - the On-board computer
   1.9. System of heating and ventilation
   1.10. Conditioner
   1.11. Heating
   1.12. Electronic climate control
   1.13. TC system
   1.14. Cruise control
   1.15. Catalyst
   1.16. Signaling device of electronic system of the engine
   1.17. System of production of the fulfilled gases
   1.18. Automatic transmission
   1.19. Instructions on driving
   1.20. Fuel economy
   1.21. Fuel grade
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



1.7. Multi - Info - the display – Check-Sontrol

GENERAL INFORMATION

 

Check-Control exercises control over the level of liquids, thickness of frictional overlays of forward disk brakes, functionality of the automatic transmission and the most important lamps of external lighting, including an electrical wiring and safety locks. At control of lamps malfunction is displayed only in case of inclusion of the corresponding chain.

After inclusion of ignition automatic check of all Check-Control functions is carried out.

If all functions over which control as it should be is exercised then the inscription Bremslicht Prufung (check of brake fires) dies away after the first pressing a brake pedal.

Messages on malfunctions are displayed on the display. In addition the inscription CHECK burns. At several malfunctions messages on them are displayed one after another.

Some messages are displayed on the display in the form of reductions.

Display of faults

 – Olstand prufen (to check oil level)

Oil level in the lubrication system of the engine is too low. As soon as possible to check oil level, to add oil.

 – Kuhlmittel Stand (level of cooling liquid)

Level of cooling liquid in a compensation tank is too low.

 – Automatik Getriebe (automatic transmission)

The transmission does not switch automatically any more. To switch manually.

 – Bremsbelag (overlay of brake shoes)

Overlays of brake shoes of forward disk brakes are worn-out to the minimum thickness.

 – Bremslicht Sicherung (a safety lock for brake fires)

The safety lock for brake fires fused. To replace a safety lock only after malfunction elimination.

 – Bremslicht (brake fires)

 – Fahrlicht Rucklicht (light of headlights, light of lamps of a backing)

Headlights of passing beam or backing failed.

 – Waschwasser Stand (level of flushing liquid)

Liquid level in a tank of windscreen washer is too low.

If messages on malfunctions are displayed, then for indication of a condition of the on-board computer the display is blocked.

The message on malfunction should be confirmed with pressing of the S or R key on the screen wiper switch lever. At a conclusion of several messages on malfunctions to confirm with consecutive pressing.

After confirmation the message on the display is erased. The display is free for indication of messages of the on-board computer. The inscription CHECK on the right on the display continues to burn, and reminds that there are one or several malfunctions.

Messages of Bremslicht Sicherung (a safety lock for brake fires), are output by Bremslicht (brake fires) and Fahrlicht Rucklicht (light of headlights, light of lamps of a backing) again in 15 minutes after confirmation.

After switching off and inclusion of ignition, written down in memory of the message, serially are removed on the display.

After elimination of malfunctions of the message are automatically erased.