Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
- 1.1. Governing bodies and control devices
   1.2. Combination of devices
   1.3. Control bulbs
   1.4. The counter of the passable way and hours
   1.5. Triple - Info - the display
   1.6. Multi - Info - the display
   1.7. Multi - Info - the display - Check-control
   1.8. Multi - Info - the display - the On-board computer
   1.9. System of heating and ventilation
   1.10. Conditioner
   1.11. Heating
   1.12. Electronic climate control
   1.13. TC system
   1.14. Cruise control
   1.15. Catalyst
   1.16. Signaling device of electronic system of the engine
   1.17. System of production of the fulfilled gases
   1.18. Automatic transmission
   1.19. Instructions on driving
   1.20. Fuel economy
   1.21. Fuel grade
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions
d65d3f49


1.12. Electronic climate control

GENERAL INFORMATION

Electronic climate control provides under any weather conditions, any external temperature and at all seasons of the year the maximum comfort.

For ensuring constant and pleasant climate in the car according to external weather conditions temperature of the arriving air, amount of air and distribution of air automatically change.

The refrigerating compressor of climate control cools air and takes away moisture.

At the switched-on refrigerating compressor at the conditioner the power consumption of such size which leads to increase in fuel consumption. If there is no need for the refrigerating compressor, then it is necessary to press the ESO key.

The filter of purification of air purifies the air arriving outside of dust and soot, and also of pollen and a dispute.

With installation on the automatic mode of conditioning the movement practically always is possible. If necessary it is possible to adjust climate control manually.

Climate control works only at the working engine.

Automatic mode

The main installations for the maximum comfort:

 – to press the AUTO key, the display and indication of function are switched on;
 – to open all nozzles of an obduv;
 – to set on the display temperature keys "+" or. "-" from 22 °C to 24 °C.

If necessary big or smaller temperature can be set.

Manual installation

Under special conditions (e.g., the frozen or misted over glasses, receipt of unpleasant smells outside) climate control functions manually can be established.

After repeated inclusion of ignition climate control is in the mode of the installations chosen earlier.

If necessary, to set an operating mode as follows:

Drying and defrosting of glasses

To press (inclusion control), indication of the AUTO mode will go out.

Temperature and having blown will be established automatically, glasses are defrozen and dry in the fastest way.

Return to the automatic mode: to press or AUTO.

Air circulation mode

To press (inclusion control), indication of the AUTO mode will go out.

Inclusion at receipt of unpleasant smells outside. The system of air circulation prevents intake of external air, air in interior of the car circulates.

The system of air circulation should be included only for some time since over time quality of air in salon worsens.

Return to the automatic mode: to press or AUTO.

The automatic mode without cooling (fuel economy).

To Press ESO (inclusion control), indication of the AUTO mode will go out.

To include for fuel economy. In this mode the refrigerating compressor is switched off.

The arriving air is not cooled and does not dry, because of it the comfort which provides climate control is limited.

Return to the automatic mode: to press ECO or AUTO.

The set temperature

The set temperature can be established by keys "+" or "-" on values between 17 °C and 27 °C.

At installation below 17 °C are displayed on the LO display: climate control works continuously with the maximum power of cooling, regulation of temperature is not carried out.

At installation above 27 °C are displayed on the HI display: climate control works continuously with the maximum heating capacity, regulation of temperature is not carried out.

Air distribution

By pressing one of the following keys (indication of the AUTO mode will go out) it is carried out:

distribution of air to the top space;
distribution of air to a windshield, to forward side glasses both to forward and to back space for legs;
distribution of air to the top space, both to forward and to back space for legs;
distribution of air to forward and to back space for legs.

Return to the automatic mode: to press the corresponding key repeatedly or to press AUTO.

Amount of air

To press on the right or at the left, indication of the AUTO mode will go out, the frequency of rotation of the fan of an obduv raises or goes down. On the display between keys K the step of an obduv is displayed.

Return to the automatic mode: to press AUTO, on the display between keys it is displayed And.

Climate control switching off

To Press OFF, all functions of climate control are switched off.

Installations of distribution of air remain in the provision of earlier chosen provisions.

Access of external air can be stopped by pressing a key.

For reasons of comfort it is necessary to turn off climate control (management of heating, obduvy and cooling) only in case of emergence in system of malfunction.

Climate control inclusion: to press OFF or AUTO.

General instructions

Climate control works more effectively if windows and the hatch of a roof are closed. If the interior of the car strongly heated up after long influence of sunshine, then to open for some time of a window that the heated-up air could disappear quicker.

For trouble-free operation it is not necessary to close openings for sensors in group of switches of climate control and between air supply openings before a windshield.

At the switched-on conditioner the condensate acting on the car bottom is formed.

Servicing

In case of unusual work of climate control: approximately within 5 seconds at the same time to hold pressed the AUTO and OFF keys, there will be a synchronization of auxiliary engines, the fan of an obduv at the same time for some time will stop.