Opel Vectra B

since 1995 release

Repair and operation of the car

Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10:10. Cowl racks
   10:11. Cowl lock cable
   10:12. Doors
   + 10:13. Door upholstery
   10:14. Internal handle of a door
   10:15. External handle of opening of a forward door
   10:16. External handle of opening of a back door
   10:17. Lock of a forward door
   10:18. Lock of a back door
   10:19. Door window regulator
   10:20. Door glass
   10:21. Trunk lid
   10:22. Trunk lid lock
   10:23. Trunk lid lock cylinder
   + 10:24. Back door
   10:25. Racks of a back door
   10:26. Lock of a back door
   10:27. Cylinder of the lock of a back door
   + 10:28. System of the central blocking
   + 10:29. Power windows
   + 10:30. External rear-view mirrors
   10:31. Front seat
   10:32. Pillow of a back seat
   10:33. Back of a back seat
   10:34. Seat belt of a front seat
   10:35. Lock of a forward seat belt and mechanism of a tension
   10:36. Seat belt of a back seat and drum
   10:37. Central console
   10:38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions

10:38. Dashboard

GENERAL INFORMATION

Dashboard

Removal

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator. Prevention After a detachment of the accumulator wait at least 1 minute in order that condensers of a control system of a safety cushion were discharged.
2. Remove a steering wheel.
3. Disconnect a wire from the safety airbag.
4. Remove switches of a screen wiper and turns.
5. Remove the ignition lock.
6. Remove the control unit of an immibilayzer.
	7. From the driver remove finishing of the lower part of the dashboard.
	8. Disconnect and remove an air duct.
9. Remove the radio receiver.
10. Remove the control unit of a heater.
11. Remove air ducts.
12. Remove a ware box.
13. Remove the central console.
14. In the presence, remove a safety cushion from the passenger.
15. Remove internal finishing of forward racks.
16. From under the panel uncover, closing pipelines of cooling liquid.
17. Remove air supply nozzles to a windshield from a forward part of the panel.
18. Remove side finishings of niches for legs.
19. Remove air ducts of heating of the left and right side.
	20. Disconnect brackets of fastening of a plait of wires to an arm.
	21. Lift a plait of wires from an arm.

22. Unscrew lower (arrows) and the top screws of fastening of an arm of a plait of wires, located under the dashboard.
23. Disconnect the electric socket of a plait of wires located on the right side of a motor compartment.
24. Unscrew a bolt and disconnect the grounding tire from the basis of a forward rack. Also disconnect the grounding tire from an arm of a steering column.
25. Remove the hydraulic modulator of the ABS system, then disconnect the electric socket of a plait of wires and take a plait in interior of the car.
26. Uncover the block with fuses, unscrew a bolt and remove the block.
	27. Unscrew the bolts fixing the dashboard to a partition of a motor compartment and remove it together with electric wires.

Installation

Installation is made in the sequence, the return to removal.