| 1. Remove an upholstery of a door and a protective film. |
| 2. At removal of a forward window regulator on models with a safety cushion remove an arm of the side sensor of a safety cushion. |
|
3. Using an adhesive tape, enshrine glass in the open provision. |
| 4. On models with power windows disconnect the electric socket of a window regulator. |
|
5. Note position of the adjusting screw of fastening of a guide of glass and unscrew the screw. |
|
6. Drill rivets of fastening of a window regulator and |
|
7. Take the lever from the channel on the basis of glass. |
|
|
| 8. Take a window regulator from a door (on a photo at the left – a window regulator of a forward door, on a photo on the right – back). |
