Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10:10. Cowl racks
   10:11. Cowl lock cable
   10:12. Doors
   + 10:13. Door upholstery
   10:14. Internal handle of a door
   10:15. External handle of opening of a forward door
   10:16. External handle of opening of a back door
   10:17. Lock of a forward door
   10:18. Lock of a back door
   10:19. Door window regulator
   10:20. Door glass
   10:21. Trunk lid
   10:22. Trunk lid lock
   10:23. Trunk lid lock cylinder
   + 10:24. Back door
   10:25. Racks of a back door
   10:26. Lock of a back door
   10:27. Cylinder of the lock of a back door
   + 10:28. System of the central blocking
   + 10:29. Power windows
   + 10:30. External rear-view mirrors
   10:31. Front seat
   10:32. Pillow of a back seat
   10:33. Back of a back seat
   10:34. Seat belt of a front seat
   10:35. Lock of a forward seat belt and mechanism of a tension
   10:36. Seat belt of a back seat and drum
   10:37. Central console
   10:38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions
d65d3f49



10:12. Doors

Removal

PERFORMANCE ORDER
1. Hinges of a door are welded on a door and a rack. In need of adjustment use special tools to bend hinges. Open a door and disconnect the electric socket located at a forward end face of a door.
2. Unscrew a bolt of fastening of an emphasis of opening of a door to a door.
3. Remove plastic covers from hinged fingers of a door. A drift beat out hinged fingers and remove a door.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Check that the door lock accurately comes on the shock plate located on a rack.
2. If adjustment is necessary, weaken the screws fixing a shock plate, move a shock plate and tighten fastening screws.