Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
- 3. Engines
   + 3.1. Repair of the SOCH engine installed in the car
   + 3.2. Repair of the DOCH engine installed in the car
   + 3.3. Repair of the diesel engine of 1,7 l installed in the car
   + 3.4. Repair of the diesel engine of 2,0 l installed in the car
   - 3.5. Capital repairs of engines
      3.5.1. Introduction
      + 3.5.2. Technical characteristics
      3.5.3. Removal and installation of the petrol engine together with the transmission
      3.5.4. Removal and installation of the diesel engine together with the transmission
      3.5.5. Repair of the engine
      3.5.6. Dismantling of a head of the block of cylinders
      3.5.7. Cleaning and survey of a head of the block of cylinders
      3.5.8. Assembly of a head of the block of cylinders
      3.5.9. Removal of pistons with rods
      3.5.10. Removal of a bent shaft
      3.5.11. Block of cylinders of the engine
      3.5.12. Pistons and rods
      3.5.13. Bent shaft
      3.5.14. Survey of radical and conrod bearings
      3.5.15. Engine balance of assembly at capital repairs
      3.5.16. Installation of piston rings
      3.5.17. Choice of bearings
      3.5.18. Installation of a bent shaft
      3.5.19. Pistons and rods, check of working gaps of conrod bearings
      3.5.20. Check of a working gap of the bearing of the lower head of a rod
      3.5.21. Installation of pistons with rods
      3.5.22. Start of the engine after capital repairs
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



3.5.15. Engine balance of assembly at capital repairs

GENERAL INFORMATION

Assembly of the engine has to be executed in the following order:

– bent shaft;
– pistons and rods;
– chains and asterisks of the mechanism of gas distribution on the diesel engine of 2,0 l;
– oil pump;
– oil pallet;
– flywheel;
– head of the block of cylinders;
– the mechanism of a tension of a gear belt and pulleys (all models, except the diesel engine of 2,0 l);
– inlet and final collectors;
– hinged knots.