Opel Vectra B

since 1995 release

Repair and operation of the car

Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   - 7.2. Mechanical transmission
      7.2.2. Introduction
      7.2.2. Technical characteristics
      7.2.3. Replacement of oil in the transmission
      7.2.4. Adjustment of the mechanism of gear shifting
      7.2.5. Gear shifting mechanism
      7.2.6. Replacement of sealing rings
      7.2.7. Backing lamp switch
      7.2.8. Removal of the transmission
   + 7.3. Automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions

7.2.6. Replacement of sealing rings

Sealing ring of a power shaft

PERFORMANCE ORDER

1. Lift a forward part of the car and record on supports. Remove the corresponding forward wheel.
2. Merge oil from the transmission.
3. Remove a power shaft.
	4. Note depth of installation of a sealing ring, then, using the screw-driver as the lever, take a sealing ring.
5. Carefully clear a nest of a sealing ring, then fill working edges of a new sealing ring with lubricant.
	6. Establish a new sealing ring into place, using the corresponding tubular mandrel.
7. Establish a power shaft.
8. Fill in oil in the transmission.

Sealing ring of an entrance shaft

PERFORMANCE ORDER

The sealing ring of an entrance shaft of the transmission is an integral part of the cylinder of switching off of coupling. If replacement of a sealing ring of an entrance shaft is necessary, it is necessary to replace the working cylinder of coupling assembled.