Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. Systems of start, ignition
   + 6.1. System of charging
   + 6.2. System of start
   + 6.3. System of ignition
   - 6.4. System of prestarting heating of diesel engines
      6.4.1. Introduction
      6.4.2. Technical characteristics
      6.4.3. Glow plugs
      6.4.4. Elements of system of prestarting heating of 1,7 l
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions



6.4.4. Elements of system of prestarting heating of 1,7 l

CONTROL UNIT OF SYSTEM OF PRESTARTING HEATING

The block is located on the left forward side of a motor compartment.

Removal and installation

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Unscrew a nut of fastening of the block.
3. Disconnect the electric socket from the block basis, unscrew two nuts and remove wires of giving of tension. Remove the block.
4. Installation is made in the sequence, the return to removal.

ELEMENT OF HEATING OF THE FUEL FILTER

Removal and installation

PERFORMANCE ORDER
1. Remove the fuel filter.
2. Remove a weight wire from the accumulator. Disconnect the electric socket from a heating element.
3. Unscrew the central bolt and remove a heating element from a casing of the fuel filter.
4. Establish a new sealing ring in dredging of an element of heating, establish a heating element on a casing of the fuel filter and fix by the central bolt.
5. Connect the accumulator and install the fuel filter.