Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   - 7.2. Mechanical transmission
      7.2.2. Introduction
      7.2.2. Technical characteristics
      7.2.3. Replacement of oil in the transmission
      7.2.4. Adjustment of the mechanism of gear shifting
      7.2.5. Gear shifting mechanism
      7.2.6. Replacement of sealing rings
      7.2.7. Backing lamp switch
      7.2.8. Removal of the transmission
   + 7.3. Automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


d65d3f49

7.2.4. Adjustment of the mechanism of gear shifting

GENERAL INFORMATION

Arrangement of a pin of blocking of the mechanism of the choice of transfers

1. Pressing of a pin of blocking
2. After movement of the lever of gear shifting the pin of blocking has to return to a starting position

Adjustment of the mechanism is made through tightening a bolt which fixes a gear shifting rod to draft of control of the transmission. The bolt is located on a back part of the transmission before a partition of a motor compartment and on the majority of models is available from above.

PERFORMANCE ORDER
1. Weaken tightening a gear shifting rod bolt, but do not unscrew completely.
2. In interior of the car remove the protection cover of the lever of gear shifting. Fix the gear shifting lever, having inserted a steel core or a drill with a diameter of 5 mm into the opening located on the left forward side in the lever basis.
3. Fix the mechanism of the choice of transfers, pressing the sprung blocking pin located on a cover of the mechanism of the choice of transfers (see rice. Arrangement of a pin of blocking of the mechanism of the choice of transfers).
4. After fixing of the lever of gear shifting and the transmission tighten tightening a gear shifting rod bolt in several stages.
5. Take a blocking core from the lever of gear shifting and check operation of the mechanism of gear shifting, and the pin of blocking of the mechanism of the choice of transfers automatically has to return to a starting position when moving the lever of gear shifting.