Opel Vectra B

since 1995 release

Repair and operation of the car


Vektr's Opel of B
- 1.1. Governing bodies and control devices
   1.2. Combination of devices
   1.3. Control bulbs
   1.4. The counter of the passable way and hours
   1.5. Triple - Info - the display
   1.6. Multi - Info - the display
   1.7. Multi - Info - the display - Check-control
   1.8. Multi - Info - the display - the On-board computer
   1.9. System of heating and ventilation
   1.10. Conditioner
   1.11. Heating
   1.12. Electronic climate control
   1.13. TC system
   1.14. Cruise control
   1.15. Catalyst
   1.16. Signaling device of electronic system of the engine
   1.17. System of production of the fulfilled gases
   1.18. Automatic transmission
   1.19. Instructions on driving
   1.20. Fuel economy
   1.21. Fuel grade
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
+ 12. Main malfunctions


d65d3f49

1.11. Heating
GENERAL INFORMATION

Heating
  – to switch off the conditioner;
 – the mode of air circulation is switched off automatically,
 – to install temperature regulator in the right situation,
 – to turn on the fan of an obduv at will, but not to establish in situation 4,
 – to install the regulator of distribution of air in situation.

In this situation access of heated-up air and to back space for legs is provided.

During a phase of warming up to close all nozzles of an obduv. Then if necessary to open side nozzles of an obduv for ensuring defrosting and to direct them to side glasses.

Drying and defrosting of glasses
 – to turn on the conditioner, for acceleration of drying joins at an external temperature above +4 °C the refrigerating compressor of the conditioner;
 – the mode of circulation is switched off automatically;
 – to install temperature regulator in the right situation;
 – to turn on the fan of an obduv at will;
 – to install the regulator of distribution of air in situation or;
 – to close all nozzles of an obduv.

For simultaneous heating of space for legs to install the regulator of distribution of air in situation.