Opel Vectra B

since 1995 release

Repair and operation of the car

Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
+ 10. Body
+ 11. Electric equipment
- 12. Main malfunctions
   12.1. Engine
   12.2. Cooling system
   12.3. Fuel system and system of production of exhaust gases
   12.4. Coupling
   12.5. Mechanical transmission
   12.6. Automatic transmission
   12.7. Power shafts
   12.8. Brake system
   12.9. Suspension bracket and steering

12.5. Mechanical transmission

GENERAL INFORMATION

Extraneous noise in neutral position of the transmission:

– are worn-out the bearing of an entrance shaft (noise is heard at the released coupling pedal);
– the release bearing of coupling is worn-out.

Noise at inclusion only of one transfer:

– teeths of a gear wheel of one transfer are worn-out or damaged.

Gear shifting is complicated:

– coupling damage;
– drafts of gear shifting are worn-out or damaged;
– drafts of gear shifting are incorrectly adjusted;
– synchronizers are worn-out.

Knocking-out of transfers:

– draft of gear shifting is worn-out or damaged;
– drafts of gear shifting are incorrectly adjusted;
– synchronizers are worn-out;
– forks of inclusion of transfers are worn-out.

Vibration:

– low level of oil;
– wear of bearings.

Oil leak:

– wear of sealing rings of differential;
– wear of consolidation of an entrance shaft.