Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10:10. Cowl racks
   10:11. Cowl lock cable
   10:12. Doors
   + 10:13. Door upholstery
   10:14. Internal handle of a door
   10:15. External handle of opening of a forward door
   10:16. External handle of opening of a back door
   10:17. Lock of a forward door
   10:18. Lock of a back door
   10:19. Door window regulator
   10:20. Door glass
   10:21. Trunk lid
   10:22. Trunk lid lock
   10:23. Trunk lid lock cylinder
   + 10:24. Back door
   10:25. Racks of a back door
   10:26. Lock of a back door
   10:27. Cylinder of the lock of a back door
   + 10:28. System of the central blocking
   + 10:29. Power windows
   + 10:30. External rear-view mirrors
   10:31. Front seat
   10:32. Pillow of a back seat
   10:33. Back of a back seat
   10:34. Seat belt of a front seat
   10:35. Lock of a forward seat belt and mechanism of a tension
   10:36. Seat belt of a back seat and drum
   10:37. Central console
   10:38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


d65d3f49

10:15. External handle of opening of a forward door

Removal

PERFORMANCE ORDER
1. Remove an upholstery of a door and a protective film.
2. Lower glass, remove consolidation from a glass guide
3. Unscrew the top screw of fastening of a back guide of glass.
4. Unscrew the back screw of fastening of a back guide of glass.
5. Remove a back guide of glass from a door.
6. Through an opening at doors unscrew a nut of fastening of a back part of the external handle of opening of a door.
7. Remove the external handle of opening of a door.
8. Disconnect drafts from an internal casing of the external handle and the cylinder of the lock.
9. Take an internal casing through an opening at doors.

Installation

Installation is made in the sequence, the return to removal.