Opel Vectra B

since 1995 release

Repair and operation of the car



Vektr's Opel of B
+ 1.1. Governing bodies and control devices
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. Running gear
- 10. Body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. Front bumper
   10.7. Rear bumper
   10.8. Front grille
   10.9. Cowl
   10:10. Cowl racks
   10:11. Cowl lock cable
   10:12. Doors
   - 10:13. Door upholstery
      10.13.1. Forward door
      10.13.2. Back door
   10:14. Internal handle of a door
   10:15. External handle of opening of a forward door
   10:16. External handle of opening of a back door
   10:17. Lock of a forward door
   10:18. Lock of a back door
   10:19. Door window regulator
   10:20. Door glass
   10:21. Trunk lid
   10:22. Trunk lid lock
   10:23. Trunk lid lock cylinder
   + 10:24. Back door
   10:25. Racks of a back door
   10:26. Lock of a back door
   10:27. Cylinder of the lock of a back door
   + 10:28. System of the central blocking
   + 10:29. Power windows
   + 10:30. External rear-view mirrors
   10:31. Front seat
   10:32. Pillow of a back seat
   10:33. Back of a back seat
   10:34. Seat belt of a front seat
   10:35. Lock of a forward seat belt and mechanism of a tension
   10:36. Seat belt of a back seat and drum
   10:37. Central console
   10:38. Dashboard
+ 11. Electric equipment
+ 12. Main malfunctions


d65d3f49

10:13. Door upholstery

10.13.1. Forward door

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Open a forward door and, having pulled on themselves, remove the handle of adjustment of an external mirror.
3. Then, using a screw-driver edge as the lever, remove a decorative overlay of the handle of a mirror.
4. Remove a noise isolation.
5. Using a screw-driver edge as the lever, remove the lower overlay of the internal handle of opening of a door.
6. Also using the screw-driver, remove a cap or the switch of a mirror with electroheating from the top party of the handle of opening of a door.
7. Using the screw-driver, remove a loudspeaker lattice.
8. Unscrew screws of fastening of the handle of a door.
9. Remove the door handle.
10. Disconnect wires from a loudspeaker.
11. On models with a manual window regulator completely close a window and note a window regulator handle arrangement. Release a bracket of fastening and remove the handle. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits.
12. Unscrew screws at the door upholstery basis.
13. Then using the screw-driver with a wide edge, separate a door upholstery from a door.
14. If it is necessary, remove a protective film from a door.

Installation

Installation is made in the sequence, the return to removal.